遇到這樣的使用問題，我們可以從以下幾個原因來解決。
Encounter such use problem, we can solve from the following several reasons.
㈠濾布錯誤放置。
A filter cloth is placed wrongly.
過濾室不能密封的緣由有很多，我們需要從簡單的入手，圍繞過濾室四周，看看是不是濾布有折皺，或者濾布邊緣有殘缺。
There are many reasons why the filter chamber can not be sealed. We need to start from a simple point of view, around the filter chamber, to see if the filter cloth is wrinkled or the edge of the filter cloth is incomplete.
由于過濾室的結構是由濾板和濾布相互扦插，受到強大的壓力憑借而成，一般濾板不容易出現問題，那剩下的是濾布。
Because the structure of the filter chamber is made up of filter plate and filter cloth cutting each other, it is formed by strong pressure. Generally, the problem of filter plate is not easy to occur, and the rest is filter cloth.
在堅硬的濾板之間要形成密封，起到關鍵性作用的濾布了，自然濾布的折皺或者殘缺容易造成濾板之間存在縫隙，自然過濾室不會形成密封了。
In order to form a seal between the hard filter plates, which plays a key role in the filter cloth, the wrinkle or incomplete of the natural filter cloth will easily cause gaps between the filter plates, and the natural filter chamber will not form a seal.
壓濾機價格 ㈡壓力不足。

Pressure filter price two pressure is insufficient.
濾板和濾布須在受到強大壓力情況下，才能實現密閉的過濾室結構，當這個壓力不足時，其施加到濾板的壓力小于了過濾液的壓力時，自然過濾液也會理所當然的能從縫隙中滲透出來。
The filter plate and filter cloth must be under strong pressure to achieve a closed filter chamber structure. When the pressure is insufficient, the pressure applied to the filter plate is less than the pressure of the filter fluid, the natural filter fluid will naturally penetrate through the gap.
㈢濾板的變形或損壞。
The third filter plate is deformed or damaged.
當濾板邊緣處受到損壞、即使微微的凸起，哪怕是一方經常磨損，同樣再于別的濾板接觸，無論怎樣的壓力，形成的過濾室也會滲透。
Even if the filter plate is slightly damaged at the edge of the filter, even if it is slightly damaged at the edge.
這一點我們根據滲漏點的情況來判斷，由于濾板損壞造成了滲透一般都會比較大，甚至有可能噴射。
We can judge this point according to the situation of the leakage point. Because of the damage of the filter plate, the seepage is generally large, and it may even spray.