噴涂廢水處理設備
本款機器是我廠根據客戶實際反饋設計定制的設備，簡單方便，無憂售后。
產品規格
生產能力：64.05 KBkg/h
電機功率：KW
催化轉速：r/min
電壓：V
定制詳情：
設備尺寸：
全國咨詢電話
400-875-8755
催化燃燒設備
RTO
粉塵治理設備
脫硫脫銷
廢水處理設備
所有產品
噴涂廢水處理設備
本款機器是我廠根據客戶實際反饋設計定制的設備，簡單方便，無憂售后。
產品規格
生產能力：64.05 KBkg/h
電機功率：KW
催化轉速：r/min
電壓：V
定制詳情：
設備尺寸：
正品行貨
售后維修
無憂退換貨
： 產品訂購流程
1.產品咨詢
撥打熱線電話或在線咨詢提供需求
2.客服接待
客服人員為您提供解決方案
3.確定方案并付款
方案確定完畢支付款項
4.發貨配送
設備打包發貨，進行配送安裝
工藝特點 Technics Characteristic
噴涂廢水主要來自于預脫脂、脫脂、表調、磷化、鈍化等車身前處理工序;陰極電泳工序和中涂、噴面漆工序，汽車涂裝廢水中含有樹脂、表面活性劑、重金屬離子、顏料等污染物，特別是其中的電泳廢水、噴漆廢水成份復雜，濃度高，可生化性差。噴涂廢水處理主要采用分質處理、混凝沉淀、混凝氣浮、砂濾等工藝對噴涂廢水進行處理。
噴涂廢水處理的特征:①噴涂廢水處理種類多，水質因使用的材料而異，僅脫脂液就有多種配方、涂料種類則更多。②排放無規律，除部分水洗水連續溢流排放外，噴涂線廢水或廢液多為間歇集中排放。③水質水量變化大，無規律可循。
噴涂廢水處理方法: (1)物理處理法。有分離法、過濾法、離心分離法等。(2)化學處理法。有中和法、凝聚法、氧化還原法等。
Spray wastewater mainly comes from pre-degreasing, degreasing, surface adjustment, phosphating, passivation and otherpre-treatment procedures. Cathode electrophoretic process and middle coating process, painting process, automotive paintingwastewater contains resin, surfactant, heavy metal ions, pigments and other pollutants, especially electrophoretic wastewater,paint wastewater composition is complex. High concentration and poor biodegradability. Spraying wastewater treatment ismainly divided into quality, coagulation precipitation, coagulation air floatation. Spraying wastewater is treated by sand filtrationprocess. The characteristics of spray wastewater treatment are as follows: there are many kinds of spray wastewater treatment,and the water quality varies with the materials used. There are many formulations in degreasing solution alone, and even morein paint types. Except for the continuous overflow discharge of some washing water, spraying line wastewater or waste liquidmostly changed greatly by intermittent concentrated discharge of 3. 3 water quality and water quantity, which can be followedirregularly.
Spraying wastewater treatment method: 1) physical treatment. There are separation method, filtration method, centrifugalseparation method and chemical treatment method. There are neutralization method, coagulation method, redox method and soon.
噴涂廢水主要來自于預脫脂、脫脂、表調、磷化、鈍化等車身前處理工序;陰極電泳工序和中涂、噴面漆工序，汽車涂裝廢水中含有樹脂、表面活性劑、重金屬離子、顏料等污染物，特別是其中的電泳廢水、噴漆廢水成份復雜，濃度高，可生化性差。噴涂廢水處理主要采用分質處理、混凝沉淀、混凝氣浮、砂濾等工藝對噴涂廢水進行處理。
噴涂廢水處理的特征:①噴涂廢水處理種類多，水質因使用的材料而異，僅脫脂液就有多種配方、涂料種類則更多。②排放無規律，除部分水洗水連續溢流排放外，噴涂線廢水或廢液多為間歇集中排放。③水質水量變化大，無規律可循。
噴涂廢水處理方法: (1)物理處理法。有分離法、過濾法、離心分離法等。(2)化學處理法。有中和法、凝聚法、氧化還原法等。
Spray wastewater mainly comes from pre-degreasing, degreasing, surface adjustment, phosphating, passivation and otherpre-treatment procedures. Cathode electrophoretic process and middle coating process, painting process, automotive paintingwastewater contains resin, surfactant, heavy metal ions, pigments and other pollutants, especially electrophoretic wastewater,paint wastewater composition is complex. High concentration and poor biodegradability. Spraying wastewater treatment ismainly divided into quality, coagulation precipitation, coagulation air floatation. Spraying wastewater is treated by sand filtrationprocess. The characteristics of spray wastewater treatment are as follows: there are many kinds of spray wastewater treatment,and the water quality varies with the materials used. There are many formulations in degreasing solution alone, and even morein paint types. Except for the continuous overflow discharge of some washing water, spraying line wastewater or waste liquidmostly changed greatly by intermittent concentrated discharge of 3. 3 water quality and water quantity, which can be followedirregularly.
Spraying wastewater treatment method: 1) physical treatment. There are separation method, filtration method, centrifugalseparation method and chemical treatment method. There are neutralization method, coagulation method, redox method and soon.